E-mail Us
Soil Testing - Products
Civil Engineering Material Testing

Infra-Red Moisture Meter (AIM 038-1)

Infra-Red Moisture Meter (AIM 038-1)This moisture meter has been designed for rapid and accurate determination of the moisture content of a wide variety of materials.It is torsion wire instruments, the torque being applied to one end of the wire be means of a calibrated drum tobalance the loss of weight as the test sample dries under infrared radiation. The speed of drying (about 30 min) thus obtained, combined with the frictionless balancing system gives the result as accurate as those obtained by standard oven drying method. Since drying weighing are simultaneous, it is useful specially for determination of moisture in substances that quickly reabsorbs moisture after drying. The infrared radiation is controlled by a voltage regulator and thereby provided excellent heat control. The instrument is provided with an indicator lamp, which glows when the unit is switched on.The torsion balance has a built-in magnetic damper or reduce pan vibrations that enables quick weighing. The balance scale (drum) is divided in terms of moisture percentage on wet weight basis, which are read directly from it. Graduations are from 0 to 100% in 0.2 % divisions, but readings may be estimated to 0.1%  moisture content. Suitable for operation on 220 V, 50Hz, Single phase, AC Supply.Capacity : 5g approx.Sensitivity : 10mg approx.Range : 0 to 100% moisture contenton wet weight basis.Reading accuracy : ± 0.20%Probable error : ± 0.25% in the lower range uptocompared to 25% and ± 1% formoisture contentsOven methods : above 50%


Determination of Moisture Content


Civil Infrastructure
Dams & Tunnels
Geophysical/ Seismology Testing
Geotechnical (soil/ rock) Testing
Real Estate
Roads, Highways & Bridges
Building Technology
Civil Department
Mining Engineering
Science Colleges
Traffic & Transportation
Roads, Highways & Bridges
Get Enquiry